Gateway 920 User Manual page 74

Invalid partition table
■
The master boot record may be corrupt. For troubleshooting information,
see "The master boot record is corrupted" on page
Invalid password
■
Enter your password again. Some passwords are case sensitive.
■
If you do not know the password, you may need to reinstall the software
you are trying to access.
■ System startup passwords are stored in BIOS. If this password has been set
and you do not know it, you may be able to reset the password through
system board jumper settings. For more information, see
BIOS passwords" on page
Memory errors were detected while the system started up
■ See "Memory errors were detected during server start up" on page 77
a possible solution.
Memory size error
■ Restart your server, then press and hold F2 to open the BIOS Setup utility.
Save the memory configuration.
Missing operating system
■ The master boot record may be corrupt. For troubleshooting information,
see "The master boot record is corrupted" on page
System Event Log Full
■
Clear the event log. To clear or view the event log, restart your server, then
press and hold F2 to open the BIOS Setup utility. Select the
then select the
61.
menu.
Event Log Control
www.gateway.com
Error messages
76.
"Bypassing the
for
76.
menu,
Advanced
69