Resetting The Bios - Gateway 920 User Manual

Resetting the BIOS

The Reset BIOS jumper on the system board lets you return all BIOS settings
to the factory defaults.
To reset the BIOS:
1
Print the appendix for
2
Restart your server.
3
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
4
Record any custom BIOS settings on your printout.
5
Follow the instructions in
page 25.
6
Turn off the server, then disconnect the power cord and all other cables
connected to the server.
7
Remove the side panel. For more information, see
case" on page
Warning
8
Place the jumper across pins 3-4 of jumper J13.
BIOS Settings
"Preventing static electricity discharge" on
26.
Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
Jumper pins 3-4
www.gateway.com
in this guide.
"Opening the server
Resetting the BIOS
59