Automatic Redial; Loudspeaker; Hands-Free Operation - TIPTEL 83 system Operating Instructions Manual

Telephone calls

Automatic redial

Should the desired target subscriber's line be busy, the display shows a selection field for the
automatic redial or the automatic call-back function (CCBS). Select the automatic redial function
so that your telephone continues to dial the chosen telephone number.
Press the  or  button in order to
1.
select the "redial" function.
Press the  button and replace the
2.
handset.
You can stop the automatic redial process:
- by picking up the handset
- by pressing the  button
The process is stopped automatically after 10 unsuccessful dialling attempts.

Loudspeaker

When holding a telephone conversation, you can activate the loudspeaker in order to allow other
people in the same room to follow the conversation.
Press the  button.
1.
Press the  button again.
2.

Hands-free operation

The hands-free mode allows you to hold a telephone conversation while the handset is on-hook.
You receive an incoming call:
Press the  button.
1.
Press the  again after having ended
2.
the telephone conversation.
You initiate an outgoing call:
Press the  button.
1.
2. Dial the target telephone number.
Press the  again after having ended
3.
the telephone conversation.
Every time you press the button, the display
switches between the available functions.
The time interval for the next redialling pro-
cess is displayed. Every 30 seconds, the tele-
phone automatically dials the telephone num-
ber in question.
The loudspeaker is activated.
The loudspeaker is deactivated.
The hands-free mode is activated. Now, you
can hold your conversation while the handset
is on-hook.
The hands-free mode is deactivated. The call
is being disconnected.
The hands-free mode is activated.
The device starts dialling.
The hands-free mode is deactivated. The call
is being disconnected.
15