Call Waiting - TIPTEL innovaphone 200 Operating Manual

When switching a call, you do not have to wait until the desired subscriber
answers. The handset can be replaced immediately after the phone number has
been dialled.

2.3.15 Call waiting

Someone tries to call you during a call. You are notified by a knocking tone.
In addition the red LED flashes to the right above the display and the new con-
nection flashes on the display.
If you would like to answer the caller without terminating the current call, then
press the Refer-back key . If you would like to terminate the current call
before answering the call, then press the Clearing key .
Call waiting can be deactivated in the Switches menu accessed via the main
menu.
2.3.16 Return call in the event of an engaged line or
unanswered call
Automatic recall can be initiated if the line of the called party is engaged.
The IP 200 indicates that the line is free as soon as the called party has termi-
nated the call. As soon as you pick up the handset of the IP 200, the call is ini-
tiated and the opposite telephone rings. The telephone network of the call
partner must support this feature.
Figure 21 Recall menu
tiptel innovaphone IP 200 Page 25