Table of Contents
Advertisement
Making telephone calls
Remark:
Please refer to the programming instructions (as of page 19) to see how
abbreviated numbers are stored.
Call number chaining (call-by-call function)
Your telephone provides the option to chain telephone number segments
which are stored under different memory stations. This is useful e. g. if you
want to dial a telephone number using a specific destination network code
(call-by-call function).
Example: You have stored a telephone number on memory dialling location 0
and a destination networkcode on speed dialling location 1.
0
Dialling the last telephone number transmitted
The „transmission of the caller's telephone number" is a service provided
by the telephone network provider and possibly has to be applied for and
released.
A telephone number transmitted with a call is automatically stored. You can
view the number and dial it. If the corresponding name is transmitted (e.g.
from a PABX) or if the name is registered in the phone book, it appears. If
there is an unanswered incoming call, „R" is shown in the display's symbol
bar. You can then view the name / telephone number and will know who had
called you. You may then dial this telephone number directly.
Press speed dialling key 1. Wait until the destination
network code has been dialled.
Press the numeric key 0 for 3 seconds minimum.The
telephone number is then linked to the destination network
code. The two numbers are shown in the display and are
dialled sequentially.
19
Advertisement
Table of Contents
