Graphic Display - Abus Secvest 2Way Operating Instructions Manual

5. Graphic display

The graphic display informs you about all events concerning the wireless alarm system. The following is an overview of the different display messages and their
meaning:
This symbol appears if a voice message
exists that should be listened to. An acoustic
message is issued every time the wireless
alarm system is deactivated. This is as
follows: "You have a message"
.
This symbol appears when activity
monitoring is activated. Remember to define
the monitoring time period. Activity
monitoring also works when the wireless
alarm system is deactivated.
Menu
Press the button under the menu display.
The wireless alarm system then prompts you
to enter your access code (user code). If the
code is accepted, the user menu is
accessed. All user functions that were
authorised by the installer can be accessed
here. Note that some functions in the user
menu require a user code with administrator
rights (master code).
21:00
01/05/2008
Displays the current time and date.
6
The four black bars stand for the four
individual partitions of the wireless
alarm system. A letter in the black
bar represents the state of the
partition (1–4). The letters and their
meaning:
Unset (deactivated)
U:
Set (activated)
S:
Part Set (internally activated)
P:
Note: A letter is only displayed in the
partition (bar) when at least one
detector is present in this partition.
This symbol indicates an error in the
wireless alarm system that must be
resolved immediately. For a
summary of the different error
displays and their meaning, see the
table at the end of these instructions.
To display the error, press the button
under the display.
You are then prompted to enter a
valid user code.