Viewing The Log - Abus Secvest 2Way Operating Instructions Manual

18.6. Viewing the log

This function enables you to read the event log. This log contains the last 250
events together with the date and time. The log cannot be deleted. When the
log is full, the oldest event is deleted to make room for a new event (FIFO
memory).
Select the View Log menu item.
Select the corresponding report trigger. To display report trigger details such
as time and date, select Expanded.
Exit this menu item by pressing Back.
If Expanded was confirmed with the control button, the following graphic
display is shown:
You can also scroll through the log using the control buttons
to the list, select the List menu item. To exit the log, select Back.
The following list gives an overview of the entries and their meaning.
Entry
Lid Tamper
Lid Tamp Restore
Telecmd U-- Low Bat
Pendant U-- Low Bat
Batt Missing
Batt Fault Restore
Invalid
Configuration Fail
Codes Defaulted
Defaults Loaded
System Startup
System Tamper
System Tamper Rstr
U-- On-Site
U-- Off-Site
Entry
U-- Change U--
U-- Delete U--
U-- Ptn # Set
U-- Ptn # UnSet
27
Meaning
The tamper contact of the housing lid was
opened.
The tamper alarm of the housing lid was
confirmed.
The remote control battery of user -- must be
replaced.
The pendant of user -- must be replaced.
There are no batteries in the system.
Batteries were fitted in the system.
No entry.
Error when storing the programming.
All user codes were reset.
The factory default settings were loaded.
The system has been put into operation.
Tamper detection on a detector or system.
The tamper alarm was confirmed.
The installer has accessed the installer menu.
The installer has exited the installer menu.
Meaning
User -- has edited user --.
User -- has deleted user --.
User -- has activated partition #.
User -- has deactivated partition #.
. To return