Abus Secvest 2Way Operating Instructions Manual page 48

3.2. FU8100 wireless remote control
User Menu System Config
•
"Y" (yes) is the default factory setting. The alarm centre is activated immediately when the FU8100 remote
control is pressed.
•
When "N" (no) is selected, the actions set under the following positions are started when the remote control
is pressed:
Installer Menu
The exit delay time is started for "Timed Set" or "Silent Set", or the corresponding action is started for
"Final Door Set" or "Instant Set".
•
Pay attention to the reception time of the FU8100 remote control for feedback (approx. 10 seconds).
After this period has elapsed, the FU8100 remote control cannot display any more feedback.
Telecommands
Partitions Partition 0x
2 Way Instant Set
Ext Mode Timed Set
Final Door Set
Instant Set
Silent Set
IV
A1 -
2 Way Instant Set Y
2 Way Instant Set N