INSTALLATION
4.
Setup and Installation
The E33 UPS can be purchased separately or factory-installed in an IBM
iSeries or pSeries rack.
NOTE If the UPS is pre-installed in an IBM pSeries (RS/6000
Installation" on page 10 or "UPS Installation" on page 11.
Tools Required
To assemble the components, the following tools may be needed:
S
S
S
4
EATON Powerware
Figure 2. Connecting the Internal Battery Connector
Install the UPS front cover (see Figure 3).
Figure 3. Installing the Front Cover
Medium flat-bladed screwdriver
#2 Phillips screwdriver
8 mm wrench or socket
®
5125 (9910-E33) UPS Installation Guide for IBM
) system, continue to "EBM
®
®
S
Applications
164201695 Rev 1