Eaton Powerware 5125 Installation Manual page 22

INSTALLATION
Table 7. Typical Power Connections (Figure 18 and Figure 19) (continued)
Item Description
8 IEC 320-C13
9 Output power (UPS to device) cords, located in the E33 accessory kit
Qty.
4
1
* Other power cords are supported by the PDU. Power cords shown are similar in voltage and amperage to the UPS.
NOTE E33 supports: PDU types 5160, 7176, or 9176 with FC 9851; PDU types 5161, 7177,
or 9177 with FC 9855.
NOTE E33 does not supp
NOTE E33 has a maximum output capacity of 2700 watts even though IBM PDU 7188 or
9188 can support higher power output. Plan accordingly.
18
EATON Powerware
Description
IEC 320-C13 to C14, 1.8m (6 ft)
IEC 320-C19 to C20, 2.7m (9 ft)
ort iSeries PDU 5162, IEC-309 (3P+N+G) 16A.
®
5125 (9910-E33) UPS Installation Guide for IBM
® S
Applications 164201695 Rev 1