Follow the instructions included with the Relay-Serial Card and Cable Kit
to install the card and set UPS monitoring functions in i5/OSt and serial
(TTY) server. Installation may include removal of an existing X-Slot card
from the UPS.
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software.
If you have an i5, connect the cables as shown in Figure 27. Otherwise,
see Figure 28 to connect the cables.
Serial (TTY)
Server
Serial Interface Cable
(labeled 124102044-003)
Communication Port
®
EATON Powerware
5125 (9910-E33) UPS Installation Guide for IBM
IBM i5 Server
"P1-T1" UPS Port
UPS Interface Cable (labeled 1827)
AS/400 Interface Cable
(labeled 152601976-001)
Relay-Serial Card
UPS
Figure 27. i5 and Serial Server Interface
®
Applications
COMMUNICATION
S
31
164201695 Rev 1