Ricoh S-C4.5 Field Service Manual page 413

Address
Progress tone detection level, and
68055E
cadence detection enable flags
68055F
To Not used
680564
680565 Long distance call prefix (HIGH)
680566 Long distance call prefix (LOW)
680567
to Not used
680571
Acceptable ringing signal frequency:
680572
range 1, upper limit
Acceptable ringing signal frequency:
680573
range 1, lower limit
Acceptable ringing signal frequency:
680574
range 2, upper limit
Acceptable ringing signal frequency:
680575
range 2, lower limit
680576 Number of rings until a call is detected
680577 Minimum required length of the first ring 20 ms
Function Unit
Bit 7: 0, Bit 6: 0, Bit 5: 0 = -25.0 dBm
Bit 7: 0, Bit 6: 0, Bit 5: 1 = -35.0 dBm
Bit 7: 0, Bit 6: 1, Bit 5: 0 = -30.0 dBm
Bit 7: 1, Bit 6: 0, Bit 5: 0 = -40.0 dBm
Bit 7: 1, Bit 6: 1, Bit 5: 0 = -49.0 dBm
Bits 2, 0 - See Note 2.
- Do not change the settings.
BCD For a code of 0:
680565 – FF
BCD
680566 - FF
- Do not change the settings.
SP2-103-003 (parameter
02).
SP2-103-004 (parameter
03).
1000/ N
(Hz).
SP2-103-005 (parameter
04).
SP2-103-006 (parameter
05).
SP2-103-007 (parameter
06).
1
The setting must not be zero.
See Note 4.
SP2-103-008 (parameter
07).
NCU Parameters
Remarks
217
5