Ricoh S-C4.5 Field Service Manual page 255

Cer Abnml Cause
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
068
2 An SSL error notification has been issued (after the certification has expired).
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
Cer: Updtt ReqID
069
The ID of the request for certification.
Firm Updating
083
Displays the status of the firmware update.
Firm Up Usr Conf
This SP setting determines if the operator can confirm the previous version of the firmware
085
before the firmware update execution. If the option to confirm the previous version is
selected, a notification is sent to the system manager and the firmware update is done with
the firmware files from the URL.
Firmware Size
086
Allows the service technician to confirm the size of the firmware data files during the
firmware update execution.
CERT: Macro Vsn
087
Displays the macro version of the @Remote certification.
CERT: PAC Vsn
088
Displays the PAC version of the @Remote certification.
System Service Mode
3
59