Ricoh S-C4.5 Field Service Manual page 384

5. Appendix: Fax Service Program
No
Maximum number of page
0-7 retransmissions in a G3 memory
transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
5
Communication Switch 09 [SP No. 1-104-010]
No
0-7 I-Fax dial interval setting
Communication Switch 0A [SP No. 1-104-011]
No
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B – Not used (do not change the settings)
Communication Switch 0C – Not used (do not change the settings)
Communication Switch 0D [SP No. 1-104-014]
188
FUNCTION
FUNCTION
FUNCTION
COMMENTS
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
COMMENTS
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by following
formula.
[Interval time = specified value with this switch x 2 sec]
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using normal
memory transmission.
Do not change the settings.