Ricoh S-C4.5 Field Service Manual page 260

3. Appendix: SP Mode Tables
FAX TX Priority
This SP determines whether pushing the off-hook button will interrupt an embedded RCG-
M transmission in progress to open the line for fax transaction. This SP can be used only if
SP5816-164 is set to "0".
[0 or 1/ 0 / - ]
0: Disable. Setting the fax unit off-hook does not interrupt a fax transaction in progress. If
187
the off-hook button is pushed during a embedded RCG-M transmission, the button must be
pushed again to set the fax unit on-hook after the embedded RCG-M transmission has
3
completed.
1: Enable. When embedded RCG-M shares a line with a fax unit, setting the fax unit off-
hook will interrupt a embedded RCG-M transmission in progress and open the line for a
fax transaction.
Polling Man Exc
200
Executes the polling test.
Instl: Condition
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the external RCG nor embedded RCG device is set.
1: The embedded RCG device is being set. Only Box registration is completed. In this status
the this unit cannot answer a polling request from the external RCG.
201
2: The embedded RCG device is set. In this status the external RCG unit cannot answer a
polling request.
3: The registered device by the external RCG is being set. In this status the embedded RCG
device cannot be set.
4: The registered module by the external RCG has not started.
Instl: ID#
202
Allows entry of the number of the request needed for the embedded RCG.
Instl: Reference
203
Executes the inquiry request to the @Remote GateWay URL.
64