Ricoh S-C4.5 Field Service Manual page 298

3. Appendix: SP Mode Tables
002
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
3
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the
pages are not counted if the jam occurs before the first sheet is output.
8 281
8 285
8 291
8 293
8 295
8 301
8 302
102
Number of rear sides fed for scanning:
With an ADF/ARDF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex scanning.
Back
With an ADF/ARDF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex rear-
side scanning.
T:Scan PGS/TWAIN
S:Scan PGS/TWAIN
T:Scan PGS/Stamp
F:Scan PGS/Stamp
S:Scan PGS/Stamp
T:Scan PGS/Size
These SPs count by size the total number of pages scanned by all applications. Use
these totals to compare original page size (scanning) and output (printing) page size
[SP 8-441].
C:Scan PGS/Size
These SPs count by size the total number of pages scanned by the Copy application.
Use these totals to compare original page size (scanning) and output (printing) page
size [SP 8-442].
CTL These SPs count the number of pages
scanned using a TWAIN driver. These
counters reveal how the TWAIN driver is
used for delivery functions.
[0 to 99999999 / 0 / 1]
CTL
• At the present time, these counters
perform identical counts.
CTL
These SPs count the number of pages
stamped with the stamp in the ADF unit.
CTL
[0 to 99999999 / 0 / 1]
CTL
CTL [0 to 99999999 / 0 / 1]
CTL [0 to 99999999 / 0 / 1]