Ricoh S-C4.5 Field Service Manual page 252

3. Appendix: SP Mode Tables
Install Status
This SP displays the RCG device installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Mode (N/M)
3
This SP displays and selects the embedded RCG connection method.
023
0: Internet connection
1: Dial-up connection
NotiTime ExpTime DFU
061
Proximity of the expiration of the certification.
HTTP Proxy Use
062
This SP setting determines if the proxy server is used when the machine communicates with
the service center.
HTTP Proxy Host
This SP sets the address of the proxy server used for communication between embedded
RCG-N and the gateway. Use this SP to set up or display the customer proxy server address.
The address is necessary to set up embedded RCG-N.
063
• The address display is limited to 127 characters. Characters beyond the 127th
• This address is customer information and is not printed in the SMC report.
HTTP Proxy Port
This SP sets the port number of the proxy server used for communication between embedded
RCG N and the gateway. This setting is necessary to set up embedded RCG-N.
064
• This port number is customer information and is not printed in the SMC report.
56
character are ignored.