Ricoh S-C4.5 Field Service Manual page 223

Adjusts the side-to-side registration for scanning in platen mode (
4011 1
Area" in the section "Replacement and Adjustment").
4012* Scan Erase Margin
4012 1 Leading Edge
4012 2 Trailing Edge
4012 3 Left Side
4012 4 Right Side
4013 Scanner Free Run
4013 1 Conducts the scanner free run with the exposure lamp on.
4015* White Plate Scan
Start position
4015 1
Adjusts the scanning start position on the white plate. The base value is 17.8 mm from the
scanner home position. This SP specifies the offset from this base value.
Scanning Length
Adjusts the distance of the white plate scan. The scan begins from the start position
4015 2
(SP4-015-001) and ends at the specified distance. The base value is 2.0 mm. This SP
decides the offset from this base value. Specify 0 (zero) or a larger value.
4428 Scan Auto Adj
Conducts the automatic scanner adjustment. Use this SP after replacing the white plate
4428 1
( "Scanning" in the section "Replacement and Adjustment").
4606 SBU Offset-Target
[0 to 9.0 / 1.0 / 0.1 mm/step]
Adjusts the scanning margin. Generally, the scanning
margin should be as little as possible. To adjust the image
area, use SP2-101.
[–3.0 to +6.0 / 0.0 / 0.1 mm/step]
[–3.0 to +6.0 / 0.0 / 0.1 mm/step]
System Service Mode
"Adjusting Copy Image
3
27