Taking Measurements Using Watchbp Office; Routine» Mode - Microlife WatchBP office Instruction Manual

Taking measurements using WatchBP Office AFIB
«ROUTINE» Mode
1) Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position and make sure Bluetooth
switch is in off position..
DC 7.5V 2.0A
2) Apply the cuff – Properly fit one cuff to the
preferred measurement arm.
Additional visual instruction can be found on the cuff
*
13
3) Switch to «ROUTINE» Mode – Slide the Mode
Switch to «ROUTINE» Mode.
ROUTINE AUSCULT SCREEN
4) Select the inflation cuff – Set the device to
inflate only the measured arm of cuff (left or
right) Press and hold the M Button for 3 seconds.
Press and hold
for 3 seconds...
ROUTINE A