Screen» And «Routine» Mode - Microlife WatchBP office Instruction Manual

3) Viewing MAP and PP values –
Ten seconds after the display of the average
blood pressure, the device will display values for
Pulse Pressure (PP) and Mean Arterial Pressure
(MAP).
SCREEN
10
seconds...
4) Viewing individual measurements – Press
the M Button once again to view individual
measurements. The display will flash a number
"3" indicating the third measurement.
5) Values for the third measurement (including PP
SCREEN
6) Press the M Button to retrieve values for second
and MAP values) will be shown on the display
in the order listed in step 3.
3
SCREEN
and first measurements from the last completed
set of measurements.
2
SCREEN
10
seconds...
1
28
EN