Troubleshooting - Microlife WatchBP office Instruction Manual

Troubleshooting

Problem
No power(No LCD display) Power supply is not
Cuff does not inflate
properly
No result displayed
between measurements
Possible cause
properly plugged
Battery is fully discharged Recharge the rechargeable battery by plugging in
Loose connection of the
tube
Leakage of the tube /
bladder
Device is in AUSCULTATION
mode or the Hide function
is activated
How to make correction
Plug power supply into wall socket.
the power supply.
Make sure the tube of the cuff is securely
connected to the device.
Check for cracks on the tube or the bladder. Please
contact Microlife customer service for this issue.
Disable "hide" function, or use «1st VISIT» /
«FOLLOW-UP» mode to measure the blood
pressure.
30
EN