Returning To The Headset After A Long Delay; Putting A Call On Hold; Music On Hold - 3Com VCX V7000 Telephone Manual

36 C 3: B
HAPTER ASIC
Returning to the
Headset After a
Long Delay
Putting a Call
on Hold

Music on Hold

T O
ELEPHONE PERATION
To answer a call when you are using the headset:
1 Put the headset on. When a call comes in, press the left soft button
associated with the incoming call.You are connected to the call.
The handset can be either on hook or off hook.
2 To end a call when you are using the headset, press the Release button
on the telephone.
Certain brands of headsets enter a power-saving mode that prevents the
telephone from ringing for one or more calls when both of these
conditions are true:
The headset amplifier buttons for Mute and On are both set to On.
The handset is off the phone for a long time (for example, overnight).
It may take a few minutes for your headset to return from the
power-saving mode to the active mode when calls first come in, so your
telephone may not ring until the headset has returned to active mode,
and you may miss a call.
If you plan to not use the headset for a long time, 3Com recommends
that you set the mute and headset buttons on the amplifier to Off and
hang up the handset on your telephone. When you are ready to receive
calls again, set up the headset for receiving calls:
1 Pick up the handset on your telephone and set it on your desk.
2 Put on the headset.
3 On the amplifier, set the headset button to On.
To put a call on hold:
1 Press the Hold button. Or press the Right button corresponding to the
call for the Actions menu, scroll to Hold, and press Select.
2 To return to the call, press the corresponding Left button. Use the scroll
buttons to locate the call if necessary.
If configured by the administrator, callers on hold hear music while they
wait.