Terminating Calls; Using The Telephone Display Panel - 3Com VCX V7000 Telephone Manual

32 C 3: B
HAPTER ASIC

Terminating Calls

Using the
Telephone Display
Panel
T O
ELEPHONE PERATION
For example, the telephone in a conference room may be configured to
prevent long-distance telephone calls. You may, however, need to place a
long-distance call during a meeting. If the permissions included with the
Class of Service on your phone allow long-distance calling, you can use
the Class of Service Override feature to apply your phone features to the
conference room phone for one call only.
To activate the one-call-only Class of Service Override for a Manager's
phone:
1 Press the Features soft button.
2 Scroll to the COS Override feature.
3 Press the Select soft button. The display panel displays
on for a few seconds
4 Enter the COS number (your phone extension) and press #.
5 Enter the COS password (your telephone password) and press #.
6 When you hear the dial tone, dial the destination telephone number.
When you use Class of Service (CoS) Override, any reports that are
generated on the VCX system indicate that the CoS features of your own
VCX telephone were applied temporarily to the telephone on which you
made the call.
You can terminate a call (hang up) by replacing the handset. Alternatively,
depending on your phone model, you can press the Release button, or if
the call is on Speaker, turn the Speaker off by pressing the Speaker
button.
The Display Panel shows the current date and time, and your extension
number. It can also show features that you have enabled. For example, if
you are logged in to a hunt group, the Display Panel shows
login enabled
The Display Panel can also list telephone status messages, Caller ID
information (if enabled), and the number of new messages (voice, e-mail,
and fax) that you have in your mailbox.
.
.
COS Override
hunt group