Paging A Group; Call Pickup - 3Com VCX V7000 Telephone Manual

66 C 5: S
HAPTER TANDARD

Paging a Group

Call Pickup

F
EATURES
A page cannot be bridged (see
information about bridging).
If you are sending or receiving a page, you can drop the page by using
the speaker button to disconnect the page, by picking up and replacing
the receiver, or by pressing the Release button.
You can view the page groups, the group extensions, and the members
of those groups by accessing the VCX User Interface (see
VCX User Interface).
To page a group:
1 Pick up the handset.
2 Dial the appropriate page group extension.
When you dial the page group extension, speakers are activated on the
telephones that are members of the group.
3 Speak the message you want to broadcast into the handset.
4 Hang up when you are finished.
Use the Call Pickup feature to answer a call that is ringing on another
telephone.
There are two types of call pickup:
Directed Call Pickup — Allows you to answer a call ringing on the
phone of a specific user. Both you and the other user must be
members of the same Directed Call Pickup group. Each Directed Call
Pickup group is assigned a security code by the administrator. You
must enter this security code when using Directed Call Pickup to
answer a call.
Group Call Pickup — Allows you to answer a call ringing on the
phone of any user who is a member of a configured Group Call Pickup
group. A Group Call Pickup group is a collection of phones that allow
each member of the group to answer another member's calls. Your
administrator can also configure a Group Call Pickup group that
allows non-group members to answer a call ringing on a phone in the
group.
Enabling Bridged Extensions for
Accessing the