Logging In To A Hunt Group - 3Com VCX V7000 Telephone Manual

76 C 5: S
HAPTER TANDARD
Table 5 Hunt Group Behavior (continued)
Condition
All members available
Total timeout reached
Logging In to a Hunt
Group
F
EATURES
Linear Hunt Group
Result
Route call to first member
in the list.
Go to call coverage.
Hunt Group calls routed to a call coverage point always go to the point
configured for the Hunt Group, not to the point configured for (or by) the
Hunt Group member (that is, the member's personal call coverage point).
If the member has Do Not Disturb enabled, personal (non-Hunt Group)
calls go to the call coverage point. However, Hunt Group calls always ring
on a member's phone, regardless of the Do Not Disturb setting.
If your telephone is part of a bridged extension, see
Bridged Line Calls
When your administrator gives you your hunt group membership
information, you can log in to your hunt group (or groups if you have
been assigned membership in multiple groups). You must be logged in to
a hunt group to receive calls for that group.
You must be logged in to your VCX system account before you can log in
to a hunt group. If you are not logged in to the VCX system, which
requires password authentication, you cannot log in to a hunt group. See
the overview section for your phone in this guide.
To log in to a hunt group:
1 Select Features.
2 Scroll to Hunt Group Login Enabled.
3 Press Select.
4 Enter the group number.
5 Enter the group password and press #.
To log out of a hunt group, repeat the steps used to log in.
Circular Hunt Group
Result
Route call to the member
following the member to
whom the last call was
routed.
Go to call coverage.
for additional information.
Calling Group
Result
Ring all member phones.
Go to call coverage.
Hunt Groups and