Table of Contents
Advertisement
Technical Specifications 160 kHz
Dimensions
Transceiver:
Height: 180 mm.
Width: 221.5 mm.
Length: 535 mm.
Computer Requirements
WASSP PC
Display unit:
Owner supplied, 1024x768 or better.
Display
Display range:
Range
5 to 400 m.
Shift
5 to 200 m.
Zoom range
2-D zooming from 250 m to 3 km,
3-D zooming from 10 m to 1 km.
Display modes:
Sonar view.
Single / Triple beam view.
3-D sonar view.
Contour view.
Backscatter view.
Display windows:
Single screen.
Vertical split screen.
Horizontal split screen.
4-screen.
Advance speed:
Slow – fast (5 speeds).
Record:
Raw data, capture maps.
Transceiver
Output power:
14 power settings from 40 W to 1.5 kW.
TX rate:
Automatic ping rate, determined by
depth.
Frequency:
160 kHz.
Beam width:
112 beams at 1.07º over 120º port/
starboard swath, Transmit 4º fore/aft,
Receive 10º fore/aft.
Maximum depth:
200 m.
Disclaimers:
The WMB-160/80F is not designed to comply with hydrographical mapping standards and therefore
must not be used as a Navigational Mapping Tool.
Specifications subject to change without notice.
WASSP Ltd.
65 Gaunt Street
Phone: +64 9 373 5595
Fax:
Westhaven
Email: wassp@WASSP.com
Auckland 1010
Web:
New Zealand
PO Box 5849
Auckland 1141
Compact Type
Height: 94 mm.
Transducer:
Width: 164 mm.
Length: 327 mm.
Stabilisation
Roll:
Interface
Inputs:
Power Supply
Transceiver:
Computer:
Environmental
Temperature:
Relative humidity:
Vibration:
Weight
Transceiver:
Transducer:
Compact type:
Equipment List
Standard:
Transducer:
Transceiver:
Computer:
Gland:
Options:
WASSP Ltd. reserve the right to change this
manual without notice.
+64 9 379 5655
The information in this manual may not, in whole or in part, be
copied, reproduced, photocopied, translated, or reduced to
www.wassp.com
any electronic medium or machine readable form without the
prior written consent of WASSP Ltd...
Copyright© 2014 WASSP Ltd. All Rights Reserved
±30º depending on sensor.
NMEA sentences: GGA, GGL, HDG,
HDT, MTW, VTG, RMC, ZDA, PSXN,
PFEC-Gpatt, PFEC-Gphve.
24 V DC, 70 W.
230 V AC, 50 to 60 Hz (inverter from
24 V DC ships supply).
0 to 40 ºC.
5 to 95% non condensing.
IEC 60945, protected equipment.
5 kg.
13 kg including cable.
See Table 1 on Page 8 for a full list
WMB-160/80F-CT Compact type (for
steel and alloy hulls).
WMB-BTxR.
WMB-SHUTTLEPC.
WMB-AG (alloy), WMB-SG (steel),
WMB-PL (plastic).
See Table 2 on Page 9 for a full list
Advertisement
Table of Contents
