Table of Contents
Advertisement
STEP
PROCEDURE
3
Transmit, receive:
a.
Click the MODE button to switch from STBY
(standby) to TX (transmit) mode.
When transmitting, the TX button animates
showing a pulse being transmitted.
Note: The MODE button is disabled
while playing back a demo file. While
in the TX (transmit) mode a demo file
cannot be played back.
4
Set up the selected screen layout:
a.
Right-click anywhere in the selected screen
layout window.
A set of options appears.
b.
Click the options you require.
5
Perform the profiling operations you require:
6
Quit the WMB-160/80F program:
When you have completed your profiling operations:
a.
Click the MODE button to set the transceiver to
standby.
b.
Click Close on the task bar.
The Exit System box appears.
c.
Click OK.
All files opened by the system are closed auto-
matically and the program shuts down.
d.
Shut down the computer following standard
Windows procedure.
e.
Turn the transceiver OFF using the POWER
button on the faceplate.
f.
Turn off the satellite compass according to the
manufacturer's instructions.
The WMB-160/80F system is now shut down.
Page 62 of 68
Installation Manual
www.wassp.com
SCREEN
A RED counting TX button means that
a ping was requested but no data was
received. A new ping is sent every 5
seconds.
Example of right-click options
See Operator Manual: OM_WMB_SYS for full
details on operating the system.
STATUS
POWER
Doc. P/N:
Version:
Issue Date:
WSP-009-002
V2.3
July 2014
Advertisement
Table of Contents
