Table of Contents
Advertisement
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
Installation Manual
Serial Transfer Task Settings
The Serial Task Transfer box has two tabbed pages for configuring serial transfer
settings:
NMEA Settings tab page. See Figure 22.
►
WASSP Settings tab page. See Figure 23.
►
The NMEA and WASSP tabbed pages allow you to configure a number of NMEA
and WMB-160/80F set up and communication port settings.
To open the Serial Task Transfer box and enter the NMEA and WMB-160/80F set
up and communication port settings:
1)
Right-click the Serial Transfer Task icon on
the Windows Task bar.
2)
Click Setup.
The Serial Transfer Task box opens.
3)
In the NMEA Settings and WASSP Settings
tabbed page configure the Network Setup
and NMEA Com Port Settings.
Note: If the Serial Transfer Task icon is not avail-
able on the Task Bar, click Start > Programs >
WASSP WMB160/80F Transfer Task.
Figure 22 – NMEA Settings Tabbed Page
www.wassp.com
1
2
Page 37 of 68
Advertisement
Table of Contents
