Wassp WMB-160F Installation Manual page 67

F series
Table of Contents

Advertisement

Technical Specifications 80 kHz
Dimensions
Transceiver:
Height: 180 mm.
Width: 221.5 mm.
Length: 535 mm.
Computer Requirements
WASSP PC
Display unit:
Owner supplied, 1024 x 768 or better
Display
Display range:
Range
5 to 800 m.
Shift
1 to 600 m.
Zoom range
2-D zooming from 500 m to 6 km,
3-D zooming from 10 m to 1 km.
Display modes:
Sonar view.
Single / Triple beam view.
3-D sonar view.
Contour view.
Backscatter view.
Display windows:
Single screen.
Vertical split screen.
Horizontal split screen.
4-screen.
Advance speed:
Slow – fast (5 speeds).
Record:
Raw data, capture maps.
Transceiver
Output power:
16 power settings from 150 W to 1.5 kW.
TX rate:
Automatic ping rate, determined by
depth.
Frequency:
80 kHz.
Beam width:
112 beams at 1.07º over 120º port/
starboard swath, Transmit 4º fore/aft,
Receive 10º fore/aft.
Maximum depth:
500 m.
Disclaimers:
The WMB-80F is not designed to comply with hydrographical mapping standards and therefore
must not be used as a Navigational Mapping Tool.
Specifications subject to change without notice.
WASSP Ltd.
Phone: +64 9 373 5595
65 Gaunt Street
Fax:
Westhaven
Email: wassp@WASSP.com
Auckland 1010
New Zealand
Web:
PO Box 5849
Auckland 1141
Sea Chest Type
Height: 130 mm.
Transducer:
Width: 334 mm.
Length: 529 mm.
WASSP Ltd. reserve the right to change this
manual without notice.
+64 9 379 5655
The information in this manual may not, in whole or in part, be
copied, reproduced, photocopied, translated, or reduced to
www.wassp.com
any electronic medium or machine readable form without the
prior written consent of WASSP Ltd...
Copyright© 2014 WASSP Ltd. All Rights Reserved
Stabilisation
Roll:
±30º depending on sensor.
Interface
Inputs:
NMEA sentences: GGA, GGL, HDG,
HDT, MTW, VTG, RMC, ZDA, PSXN,
PFEC-Gpatt, PFEC-Gphve.
Power Supply
24 V DC, 150 W.
Transceiver:
230 V AC, 50 to 60 Hz (inverter from
Computer:
24 V DC ships supply).
Environmental
Temperature:
0 to 40 ºC.
Relative humidity:
5 to 95% non condensing.
Weight
Transceiver:
5 kg.
Transducer:
Compact type:
43 kg including cable.
Equipment List
Standard:
See Table 1 on Page 8 for a full list
Transducer:
WMB-80F-SC (Sea chest type for
steel and alloy hulls).
Transceiver:
WMB-BTxR.
Computer:
WMB-SHUTTLEPC.
Gland:
WMB-AG (alloy), WMB-SG (steel),
WMB-PL (plastic).
Options:
See Table 2 on Page 9 for a full list

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wmb-80f

Table of Contents