Table of Contents
Advertisement
Software Installation
1
WASSP Setup Wizard.
Click Next
Read the agreement and then click I
2
accept the agreement box
Click Next
Page 30 of 68
Installation Manual
Your WASSP system is supplied with the WASSP-F software fully pre-loaded onthe
WASSP PC.
Re-installing or Upgrading the WMB-160/80F System Software
Program
You must unistall the previous version of WASSP before up-grading.
Software / Firmware upgrades are supplied on a CD, USB memory stick or via
download from the Internet. When you run the new install programme, the WASSP
Install.exe program automatically performs a system check and compares the
current versions of software and firmware against the versions in your system.
Depending on the versions of software and firmware installed in your system, the
install program has a number of responses.
If, while the system check is running, multiple copies of the WASSP system
software and firmware are detected, an Information box informs you of this and
states that it is using the last one for comparison.
As the installer will use the first WASSP application installed, which may be the
wrong one, it is usually better to click OK and then remove all existing copies from
your system before going any further.
This is not an issue if there is only one WASSP application installed.
www.wassp.com
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
Advertisement
Table of Contents
