Table of Contents
Advertisement
RJ-45-Type Transceiver Connections
The seven receiver cables
MUST be connected in the
order shown. Failure to
do this will result in faulty
operation of the WASSP
system.
The transceiver cable MUST be fit-
ted with the supplied cable clamp to
prevent strain on the RJ-45 connec-
tors where they plug into the front of
the BTxR.
Page 24 of 68
Installation Manual
3-pin Plug transmitter
connection
Transmitter Cable
Figure 14 – Transducer to RJ45-type Transceiver Cable Connections
Cable Clamp
www.wassp.com
CAT5 Ethernet
Cable Socket
Figure 14b –
RJ45-type Transceiver Cable Clamp
Doc. P/N:
Version:
Issue Date:
24 Volt Power
Supply Socket
7 Receiver Cables
WSP-009-002
V2.3
July 2014
Advertisement
Table of Contents
