Troubleshooting
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
Installation Manual
If the WMB-160/80F program provides no data when you transmit, check the
following:
Ensure that all cables have been installed and connected correctly.
►
See Figure 16, WMB-160/80F Transceiver Interface Connections for details.
Software installation and settings.
►
See procedures for Checking Software Installation in the WASSP Operator
Manual.
NMEA data sentences.
►
See Checking Software Installation procedures to check NMEA data
sentences in the WASSP Operator Manual.
For further troubleshooting assistance, refer to the Frequently Asked
►
Questions (FAQ) section in the back of the WASSP Operator Manual.
www.wassp.com
Page 63 of 68