Table of Contents
Advertisement
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
Installation Manual
Installation Manual
Transmitter Cable Socket Assembly
If the transmitter cable socket needs to be disassembled, use the locking ring
tightening tool supplied with the BTxR to loosen the locking ring. To assemble the
3-pin sealed plug:
• Gland Nut.
• Gland Cage.
• Gland.
• Main Body.
Locking Ring
BLACK
E
N
WHITE
Later cable colour code
1)
Push the following parts over the transmit-
ter wires:
2)
Attach the RED or WHITE wire to L, the
BLACK wire to N, and the GREEN wire
to E on the socket and tighten all three
screws.
3)
Push the socket into the main body, mak-
ing sure that the flat on the socket locates
into the flat on the main body.
4)
Using the tightening tool, screw the locking
ring into the front of the socket until tight.
5)
Push the gland, gland cage, and gland nut
into the main body as far as it will go and
tighten the nut securely.
www.wassp.com
Locking Ring
Tightening Tool
Main Body
Socket
GREEN
L
Gland Nut
Locking Cap
Gland
Gland Cage
BLACK
E
GREEN
N
L
RED
Early cable colour code
Tightening Tool
Page 23 of 68
Advertisement
Table of Contents
