Table of Contents
Advertisement
Mounting Methods
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
Installation Manual
WMBT-160F-CT
Type Transducer
VIEWED FROM ABOVE
Figure 3 – Through-hull Compact Type Transducer Mounting
When mounting the transducer, ensure it is accurately running parallel to the
►
keel in a bow-stern direction. See Figure 4.
90°
90°
Transducer
AFT
Figure 4 – Placing the Transducer on the Keel
The above mounting example is provided as a guide.
WASSP Ltd. recommend that a reputable boat builder is used to
install the transducer to prevent damage to the vessel's hull.
www.wassp.com
WMBT-160F-CT
Type Transducer
Location must be such that
beam is clear of hull.
Avoid mounting another transducer in the vicinity
of the WASSP Transducer, especially along the line of the beam.
HORIZONTAL PLANE
90°
Looking from above (not to scale)
100 meters
120°
Depth
Beam
Angle
200 meters
FORWARD
Keel
Page 11 of 68
Advertisement
Table of Contents
