Table of Contents
Advertisement
User Dongle
To run the system, you must connect the supplied WMB-160/80F user dongle. If you do
not have a dongle attached to the system you will not be able to run the WMB-160/80F
program with transceiver input or GPS input. The software prompts you that a dongle is not
connected.
If operating without a dongle you can play recorded WMB-160/80F data files, regenerate
contour maps, and view the five displays. The mode button has the text DEMO to show that
you cannot operate the transducer or transceiver.
If you attach a dongle after running the WMB-160/80F software program, restart the WMB-
160/80F program.
For a complete description of the WMB-160/80F Multi-beam Sonar System program
functions, refer to the WASSP Operator Manual.
Satellite Compass Software Set Up
If a satellite compass is used as the positioning sensor it must be selected in the
WMB-160/80F program. Follow the steps below to set the user interface up for an
SC-30 satellite compass:
Note: The transceiver does not need to be running to set up the
SC-30 as the satellite compass.
STEP
PROCEDURE
1
With the WMB-160/80F program running, click the
System Configuration Utility icon on the Menu
task bar.
The System Configuration Utility window opens.
2
Click Technician.
The Technician Utility box appears.
Page 34 of 68
Installation Manual
www.wassp.com
SCREEN
1
Doc. P/N:
WSP-009-002
Version:
V2.3
Issue Date:
July 2014
2
Advertisement
Table of Contents
