Formatting Your Logical Drives; Locating A Logical Drive - G-Technology G SPEED STUDIO XL Product Manual

G SPEED
STUDIO
with Thunderbolt™

Formatting Your Logical Drives

If you left the Format box checked when you created your logical drives, they will be formatted
automatically.
If you Unchecked the Format box, you must format your logical drives manually. See Formatting
Logical Drives.
When the G-SPEED Studio Software Utility finishes formatting, new drive icons, each
representing one logical drive, will appear on your desktop (right).
When you see the icon, your logical drive will be ready to use.

Locating a Logical Drive

This feature causes the drive carrier LEDs to flash for one minute to assist you in locating the physical
drives that make up a logical drive.
To locate a logical drive:
1. Click the Logical Drive icon. The list of logical drives will appear.
2. Mouse-over the logical drive you want, then click the Locate button. The drive power/status LEDs
for the physical drives that make up the logical drive will blink blue for one minute.
Running the Locate function to identify a disk array:
Configuring G-SPEED Studio XL
XL
Drive power/status
LEDs blink blue
p. 84