Changing Rebuild Settings; Migration - G-Technology G SPEED STUDIO XL Product Manual

G SPEED
STUDIO
with Thunderbolt™

Changing Rebuild Settings

1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Rebuild Rate drop-down menu and choose a rate:
• Low: Fewer system resources are allocated to the rebuild, leaving more resources for data
read/write operations.
• Medium: Balances system resources between the rebuild and data read/write operations.
• High: More system resources are allocated to the rebuild and fewer for data read/write
operations.
4. Check the Enable Auto Rebuild box to enable Auto Rebuild. This will initiate a rebuild when you
swap out the failed drive with a new one.
5. Click the Confirm button.
6. Click the X icon to close the background activities panel.

Migration

The term "Migration" means that you are doing one or both of the following:
• Changing the RAID level of a logical drive
• Expanding the storage capacity of a logical drive (See Migrating a Logical Drive)
Configuring G-SPEED Studio XL
XL
p. 51