G-Technology G SPEED STUDIO XL Product Manual page 102

Maintenance for Your Drive
G SPEED
XL
STUDIO
with Thunderbolt™
1. Launch the G-SPEED Studio Software Utility.
2. Select the Physical Drive.
3. The Physical Drive List will show all of the drives and next to its name the status will indicate Dead.
4. Right-click on the failed drive and select Locate.
WARNING: Make absolutely sure that you remove the correct drive as indicated in the steps below.
REMOVING THE WRONG DRIVE CAN RESULT IN LOSS OF THE ARRAY AND ALL CONTENT STORED
ON YOUR G-SPEED STUDIO XL.
p. 102