G SPEED
STUDIO
with Thunderbolt™
Locating an Enclosure
If you have multiple G-SPEED Studio XL units and you want to verify which unit you are accessing in
the G-Technology Utility, use the Locate function.
To locate an enclosure:
1. From Logical Drive Icon Click the Locate button.
The Drive Power /Status LEDs on all drive carriers blink blue and orange for one minute.
Running the Locate function to identify an enclosure:
Managing the RAID Controller
RAID controller management includes:
• "Viewing Controller Information"
• "Viewing Controller Statistics"
• "Changing Controller Settings"
• "Changing Buzzer Settings"
Viewing Controller Information
To view controller information, you can access the Controller info page from the Dashboard panel under
System Status. You can also select the Component List from the View pull-down window and navigate to
Customize Toolbar where you can add Component List. The Information tab will be displayed.
Configuring G-SPEED Studio XL
XL
Drive Power/Status LEDs blink
blue and orange
p. 39