Changing Level & Span; Changing The Level; Changing The Span - FLIR ThermaCAM P45 User Manual

8 – Tutorials
8.5
8.5.1
Step
1
2
3
4
➲ You can also change the level by pointing to Level/Span on the Image menu, and
then change the level by moving the joystick up/down.
For more information about level, see section 10.2.4.3 – Level/Span on page 89.
8.5.2
Step
1
8
2
3
4
➲ You can also change the span by pointing to Level/Span on the Image menu, and
then change the span by moving the joystick left/right.
For more information about span, see section 10.2.4.3 – Level/Span on page 89.
50
Changing level & span

Changing the level

Action
Press the joystick to display the horizontal menu bar.
If the camera is in continuous adjust mode, point to Manual adjust on the Image
menu and press the joystick.
Change the level by moving the joystick up/down. An arrow pointing upwards or
downwards will be displayed.
Press the joystick to leave level/span mode.

Changing the span

Action
Press the joystick to display the horizontal menu bar.
If the camera is in continuous adjust mode, point to Manual adjust on the Image
menu and press the joystick.
Change the span by moving the joystick left/right. Two arrows pointing away from
each other or towards each other will be displayed.
Press the joystick to leave level/span mode.
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006