Manual Adjustment By Using The Navigation Pad; Manual Adjustment In Level, Span Mode - FLIR T530 User Manual

14 Achieving a good image
maximum and minimum temperatures in that area. By using the color information only for
the relevant temperatures, you will get more details in your area of interest.
14.3.2.3 Locking the touch screen
When you have adjusted the image to levels that allow you to study your area of interest,
you can lock the touch screen to prevent further unintentional adjustments.
To lock the screen, touch the
To unlock the screen, touch the
Note If you switch to automatic image adjustment mode, the screen automatically un-
locks and your manual adjustments are lost.

14.3.3 Manual adjustment by using the navigation pad

14.3.3.1 Manual adjustment modes
There are two different settings for the manual adjustment mode (applicable for the navi-
gation pad only):
• Level, Span: With this setting, you can manually adjust the level and span by using the
navigation pad.
• Level, Max, Min: With this setting, you can manually adjust the level by using the navi-
gation pad. You can also change the upper and lower temperatures individually.
Select the type of manual image adjustment mode under
> User interface options > Manual adjustment mode.

14.3.4 Manual adjustment in Level, Span mode

Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Span mode. Select Settings > Device settings > User interface op-
tions > Manual adjustment mode = Level, Span.
Follow this procedure:
1. In live mode, touch the soft button
2. Push the navigation pad up/down to increase/decrease the level.
3. Push the navigation pad left/right to increase/decrease the span.
#T810253; r. AA/42549/42549; en-US
icon to the left of the temperature scale.
icon to the left of the temperature scale.
to enter manual image adjustment mode.
(Settings) > Device settings
58