Palette; Hide Graphics - FLIR ThermaCAM P45 User Manual

10 – Camera program
Point to Continuous adjust and press the joystick to put the camera in automatic
■
mode, continuously optimizing the image for best level and span
For more information about the Level/Span command, see section 10.2.4.3 – Lev-
el/Span on page 89.
10.2.4.5
10392003;a4
Figure 10.37 Palette dialog box
Point to Palette and press the joystick to display a dialog box where you can change
the color palette.
Figure 10.38 Explanations of the Palette dialog box
Label

Palette

Inverted
Custom palettes (*.pal) can be used by the camera. For more information about how
to create custom palettes, contact FLIR Systems.
10.2.4.6
Point to Hide graphics and press the joystick to hide all on-screen graphics (e.g. result
table, status bar etc.). To display the graphics again, press the joystick or the C button.
10
90
Palette
Value
Configuration-depen-
dent
Yes
■
No
■

Hide graphics

Comments
Move the joystick left/right to change the palette.
Move the joystick left/right to reverse the current
palette.
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006