FLIR ThermaCAM P45 User Manual page 110

10 – Camera program
Label
Overlay
Figure 10.45 Naming based on unique counter – explanations
Typical syntax: IR_nnnn.jpg
IR
nnnn
Example
Comment
Figure 10.46 Naming based on current date – explanations
Typical syntax: IR_YYMMDD_nnn.jpg
IR
YYMMDD
nnn
10
Example
Comment
Figure 10.47 Naming based on current directory – explanations
Typical syntax: IR_DIRE_nnn.jpg
IR
DIRE
nnn
Example
94
Value
On
■
Off
■
Comments
If On is selected, all on-screen graphics will be
■
saved together with the image
If Off is selected, only the image (together with
■
any temperature information) will be saved
➲ The difference between images saved with or
without on-screen graphics will only be evident
when looking at the images using a third-party
image viewer.
IR = infrared image
■
Unique counter
IR_0003.jpg
The counter will be reset when exceeding 9999,
or when you point to Factory default on the Setup
menu and press the joystick.
IR = infrared image
■
Current date. The format depends on your settings
in the Local settings dialog box.
Counter within directory
IR_020909_001.jpg
The counter will be reset every day.
IR = infrared image
■
The first four letters in the directory name
Counter within directory
IR_ COMP_003.jpg
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006