Create A New Folder; Freezing & Unfreezing An Image; Saving An Image - FLIR ThermaCAM P45 User Manual

Step Action
3 Do one of the following:
To go up on level, select the symbol to the left below, and press the joystick.
■
To go down one level, select the symbol to the right below, and press the joy-
■
stick.
10726403;a2
Figure 8.1 LEFT: Folder symbol to go up one level; RIGHT: Folder symbol to
down one level
8.2.5

Create a new folder

Step Action
1 Press the joystick to display the horizontal menu bar.
2 Point to Images on the File menu and press the joystick.
3 Move the joystick up/down or left/right to any position in a directory where you
want to create a new folder.
4 Press and hold down the joystick for two seconds to display a shortcut menu.
5 On the shortcut menu, select Create new folder to create a new folder at the current
level.
8.2.6 Freezing & unfreezing an image
Step Action
1 Press and hold down the A button for one second to adjust the focus.
2 Briefly press the A button to autoadjust the camera.
3 Briefly press the S button to freeze the image. To unfreeze the image, press the
S button once again.
8.2.7

Saving an image

Step Action
1 Press and hold down the A button for one second to adjust the focus.
2 Briefly press the A button to autoadjust the camera.
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
8 – Tutorials
8
43