10.2.4
Image menu
10.2.4.1
Freeze/Live
Point to Freeze/Live and press the joystick to switch between freeze image mode
and live image mode. It has the same effect as if you briefly press the S button.
10.2.4.2
Range
10391903;a6
Figure 10.35 Range dialog box
Point to Range and press the joystick to display a dialog box where you can set the
range.
10.2.4.3
Level/Span
Point to Level/Span and press the joystick to manually change level and span. The
level command can be regarded as the brightness, while the span command can be
regarded as the contrast.
Move the joystick up/down to change the level (indicated by an arrow pointing
■
upwards or downwards in the temperature scale)
Move the joystick left/right to change the span (indicated by two arrows pointing
■
away from each other or towards each other)
10392103;a3
Figure 10.36 Symbols in the temperature scale, indicating (1) increasing span; (2) decreasing span; (3)
increasing level, and (4) decreasing level
For more information about object parameters, see section 18 – Thermographic
measurement techniques on page 145.
10.2.4.4
Manual adjust / Continuous adjust
Point to Manual adjust and press the joystick to put the camera in manual adjust
■
mode. You can now change level and span by first pressing the C button repeat-
edly (to change the function of the joystick to level/span), and then change level
or span by moving the joystick up/down and left/right, respectively
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
10 – Camera program
89
10