Autofocus - FLIR ThermaCAM P45 User Manual

9 – Camera overview
9.3
To focus the camera using the autofocus feature, press and hold down the A button
for one second.
➲ Please note the following:
The area that the camera uses when autofocusing is a 80 × 60 pixel box, centered
■
vertically and horizontally on the screen
The camera will have difficulties autofocusing when the image has low contrasts
■
between different areas
You should keep the camera steady when autofocusing
■
9
66

Autofocus

Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006