Analysis Menu; Edit Mode; Add Spot - FLIR ThermaCAM P45 User Manual

10.2.3

Analysis menu

10.2.3.1

Edit mode

Point to Edit mode and press the joystick to enter the edit mode of the camera. When
the camera is in edit mode you can select, move, and resize measurement markers
as well as changing levels of isotherms etc. You leave edit mode by pressing the C
button.
10.2.3.2

Add spot

Point to Add spot and press the joystick to add a spot. A spot will now be displayed
on the screen. Press and hold down the joystick for one second when the spot is
selected to display a shortcut menu.
10390103;a3
Figure 10.13 Shortcut menu for Spot
Figure 10.14 Explanations of the shortcut menu for Spot
Command
Delete
Exit edit mode
Set as ref temp
Settings
Point to Settings and press the joystick to display a Spot settings dialog box where
you can change the settings for the spot.
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
Explanation
Point to Delete and press the joystick to delete the spot.
Point to Exit edit mode and press the joystick to exit the edit mode.
Point to Set as ref temp and press the joystick to use the spot tem-
perature as the reference temperature.
See below.
10 – Camera program
77
10