Example 2; Manual Adjustment In Level, Span Mode; Manual Adjustment In Level, Max, Min Mode - FLIR E95 User Manual

13 Achieving a good image
Automatic

13.3.3 Example 2

Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature scale in the right image has
been changed to values close to the temperature of the isolator.
Automatic

13.3.4 Manual adjustment in Level, Span mode

Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Span mode. Select Settings > Device settings > User interface op-
tions > Manual adjustment mode = Level, Span.
Follow this procedure:
1. In live mode, push the navigation pad to display the menu system.
2. Select (Temperature scale) and push the navigation pad. This displays a submenu.
3. Select (Manual) and push the navigation pad.
4. Push the navigation pad up/down to increase/decrease the level.
5. Push the navigation pad left/right to increase/decrease the span.

13.3.5 Manual adjustment in Level, Max, Min mode

Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Max, Min mode. Select Settings > Device settings > User interface
options > Manual adjustment mode = Level, Max, Min.
Follow this procedure:
1. In live mode, push the navigation pad to display the menu system.
#T810190; r. AI/41890/41890; en-US
Manual
Manual
61