Technical Specifications & Dimensional Drawings; Imaging Performance; Detector; Image Presentation - FLIR ThermaCAM P45 User Manual

16 Technical specifications &
dimensional drawings
➲ FLIR Systems reserves the right to discontinue models, parts and accessories, and
other items, or change specifications at any time without prior notice.
16.1

Imaging performance

Spatial resolution
Accuracy
Image frequency
Focus
Digital image enhancement
16.2

Detector

Type
Spectral range
16.3

Image presentation

Viewfinder
16.4

Temperature ranges

Temperature range
16.5

Correction parameters

Emissivity correction
Atmospheric transmission correction
Optics transmission correction
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
1.3 mrad
± 2 °C/± 3.6 °F or ± 2 % of reading
50/60 Hz, non-interlaced
Automatic or manual
Adaptive digital noise reduction
Focal Plane Array (FPA), uncooled microbolome-
ter,
320 × 240 pixels
7.5–13 μm
Built-in, high resolution color LCD (TFT)
Temperature range is subject to customer config-
uration, and/or three-digit camera type number.
Refer to the camera menu system to see available
temperature ranges.
Set by number, or by selection in predefined list
Automatic, based on input from distance, atmo-
spheric temperature, and relative humidity.
Automatic, based on signals from internal sensors
16
115