Add Line - FLIR ThermaCAM P45 User Manual

Label
Result
10.2.3.5

Add line

Point to Add line and press the joystick to add a line. A line will now appear on the
screen. Press and hold down the joystick for one second when the line is selected
to display a shortcut menu.
10390703;a3
Figure 10.25 Shortcut menu for Line
Figure 10.26 Explanations of the shortcut menu for Line
Command
Delete
Exit edit mode
Show profile
Set as ref temp
Cursor
Max
Min
Avg
Publ. No. 1557966 Rev. a155 – ENGLISH (EN) – February 6, 2006
Value
Min
■
Max
■
Avg
■
Explanation
Point to Delete and press the joystick to delete the line.
Point to Exit edit mode and press the joystick to exit the edit mode.
Point to Show profile and press the joystick to display a profile
window. The profile window displays the different temperature levels
along the line as a graph.
Point to Set as ref temp and press the joystick to use the line tem-
perature as the reference temperature.
Point to Cursor and press the joystick to display a cursor that you
can move along the line.
Point to Max and press the joystick to display the maximum temper-
ature along the line.
Point to Min and press the joystick to display the minimum temper-
ature along the line.
Point to Avg and press the joystick to display the average tempera-
ture along the line.
Comments
To change how the circle displays the measure-
ment results, select Max, Min, or Avg.
10 – Camera program
83
10